dilseshaadi.com - Faizzz-Chin ShellXploit

SHELL BYPASS 403 |

Modern UI. Responsive. Powerful.

Faizzz-Chin Shell

: /root/.cpanm/ [ drwxr-xr-x ]

cpanm (App::cpanminus) 1.9019 on perl 5.016003 built for x86_64-linux-thread-multi Work directory is /root/.cpanm/work/1693412468.26304 You have make /bin/make You have LWP: 6.05 You have /bin/tar: tar (GNU tar) 1.26 Copyright (C) 2011 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Written by John Gilmore and Jay Fenlason. You have /bin/unzip Searching CPAN () on cpanmetadb ... --> Working on CPAN Fetching http://www.cpan.org/authors/id/A/AN/ANDK/CPAN-2.36.tar.gz -> OK Unpacking CPAN-2.36.tar.gz Entering CPAN-2.36 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68) Configuring CPAN-2.36 Running Makefile.PL Importing PAUSE public key into your GnuPG keychain... done! (You may wish to trust it locally with 'gpg --lsign-key 2E66557AB97C19C791AF8E20328DA867450F89EC') Checking if your kit is complete... Looks good Warning: prerequisite CPAN::Meta::Requirements 2.121 not found. Writing Makefile for CPAN -> OK -> FAIL No MYMETA file is found after configure. Your toolchain is too old? Building CPAN-2.36 cp lib/CPAN.pm blib/lib/CPAN.pm cp lib/CPAN/CacheMgr.pm blib/lib/CPAN/CacheMgr.pm cp lib/CPAN/FTP/netrc.pm blib/lib/CPAN/FTP/netrc.pm cp lib/CPAN/LWP/UserAgent.pm blib/lib/CPAN/LWP/UserAgent.pm cp lib/CPAN/FTP.pm blib/lib/CPAN/FTP.pm cp lib/CPAN/Queue.pm blib/lib/CPAN/Queue.pm cp lib/CPAN/Distroprefs.pm blib/lib/CPAN/Distroprefs.pm cp lib/CPAN/Kwalify/distroprefs.yml blib/lib/CPAN/Kwalify/distroprefs.yml cp lib/App/Cpan.pm blib/lib/App/Cpan.pm cp lib/CPAN/Kwalify.pm blib/lib/CPAN/Kwalify.pm cp lib/CPAN/Module.pm blib/lib/CPAN/Module.pm cp lib/CPAN/Author.pm blib/lib/CPAN/Author.pm cp lib/CPAN/Debug.pm blib/lib/CPAN/Debug.pm cp lib/CPAN/HTTP/Credentials.pm blib/lib/CPAN/HTTP/Credentials.pm cp lib/CPAN/API/HOWTO.pod blib/lib/CPAN/API/HOWTO.pod cp lib/CPAN/Complete.pm blib/lib/CPAN/Complete.pm cp lib/CPAN/HTTP/Client.pm blib/lib/CPAN/HTTP/Client.pm cp lib/CPAN/FirstTime.pm blib/lib/CPAN/FirstTime.pm cp lib/CPAN/Distrostatus.pm blib/lib/CPAN/Distrostatus.pm cp lib/CPAN/Exception/blocked_urllist.pm blib/lib/CPAN/Exception/blocked_urllist.pm cp lib/CPAN/Tarzip.pm blib/lib/CPAN/Tarzip.pm cp lib/CPAN/Admin.pm blib/lib/CPAN/Admin.pm cp lib/CPAN/Prompt.pm blib/lib/CPAN/Prompt.pm cp lib/CPAN/URL.pm blib/lib/CPAN/URL.pm cp lib/CPAN/Version.pm blib/lib/CPAN/Version.pm cp lib/CPAN/DeferredCode.pm blib/lib/CPAN/DeferredCode.pm cp lib/CPAN/Distribution.pm blib/lib/CPAN/Distribution.pm cp lib/CPAN/Nox.pm blib/lib/CPAN/Nox.pm cp lib/CPAN/Bundle.pm blib/lib/CPAN/Bundle.pm cp lib/CPAN/Exception/RecursiveDependency.pm blib/lib/CPAN/Exception/RecursiveDependency.pm cp lib/CPAN/Plugin/Specfile.pm blib/lib/CPAN/Plugin/Specfile.pm cp lib/CPAN/Shell.pm blib/lib/CPAN/Shell.pm cp lib/CPAN/HandleConfig.pm blib/lib/CPAN/HandleConfig.pm cp lib/CPAN/InfoObj.pm blib/lib/CPAN/InfoObj.pm cp lib/CPAN/Exception/yaml_process_error.pm blib/lib/CPAN/Exception/yaml_process_error.pm cp lib/CPAN/Exception/yaml_not_installed.pm blib/lib/CPAN/Exception/yaml_not_installed.pm cp lib/CPAN/Plugin.pm blib/lib/CPAN/Plugin.pm cp lib/CPAN/Index.pm blib/lib/CPAN/Index.pm cp lib/CPAN/Kwalify/distroprefs.dd blib/lib/CPAN/Kwalify/distroprefs.dd cp lib/CPAN/Mirrors.pm blib/lib/CPAN/Mirrors.pm cp scripts/cpan-mirrors blib/script/cpan-mirrors /usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpan-mirrors cp scripts/cpan blib/script/cpan /usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpan Manifying blib/man1/cpan-mirrors.1 Manifying blib/man1/cpan.1 Manifying blib/man3/CPAN.3pm Manifying blib/man3/CPAN::Tarzip.3pm Manifying blib/man3/CPAN::Admin.3pm Manifying blib/man3/CPAN::Queue.3pm Manifying blib/man3/CPAN::Distroprefs.3pm Manifying blib/man3/CPAN::Version.3pm Manifying blib/man3/App::Cpan.3pm Manifying blib/man3/CPAN::Kwalify.3pm Manifying blib/man3/CPAN::Nox.3pm Manifying blib/man3/CPAN::Plugin::Specfile.3pm Manifying blib/man3/CPAN::Debug.3pm Manifying blib/man3/CPAN::HandleConfig.3pm Manifying blib/man3/CPAN::Plugin.3pm Manifying blib/man3/CPAN::API::HOWTO.3pm Manifying blib/man3/CPAN::Mirrors.3pm Manifying blib/man3/CPAN::FirstTime.3pm Installing /usr/local/share/perl5/CPAN.pm Installing /usr/local/share/perl5/CPAN/HandleConfig.pm Installing /usr/local/share/perl5/CPAN/Distrostatus.pm Installing /usr/local/share/perl5/CPAN/FTP.pm Installing /usr/local/share/perl5/CPAN/Plugin.pm Installing /usr/local/share/perl5/CPAN/Distribution.pm Installing /usr/local/share/perl5/CPAN/CacheMgr.pm Installing /usr/local/share/perl5/CPAN/Version.pm Installing /usr/local/share/perl5/CPAN/FirstTime.pm Installing /usr/local/share/perl5/CPAN/Index.pm Installing /usr/local/share/perl5/CPAN/DeferredCode.pm Installing /usr/local/share/perl5/CPAN/Bundle.pm Installing /usr/local/share/perl5/CPAN/InfoObj.pm Installing /usr/local/share/perl5/CPAN/Complete.pm Installing /usr/local/share/perl5/CPAN/URL.pm Installing /usr/local/share/perl5/CPAN/Module.pm Installing /usr/local/share/perl5/CPAN/Mirrors.pm Installing /usr/local/share/perl5/CPAN/Queue.pm Installing /usr/local/share/perl5/CPAN/Nox.pm Installing /usr/local/share/perl5/CPAN/Shell.pm Installing /usr/local/share/perl5/CPAN/Author.pm Installing /usr/local/share/perl5/CPAN/Tarzip.pm Installing /usr/local/share/perl5/CPAN/Kwalify.pm Installing /usr/local/share/perl5/CPAN/Admin.pm Installing /usr/local/share/perl5/CPAN/Debug.pm Installing /usr/local/share/perl5/CPAN/Distroprefs.pm Installing /usr/local/share/perl5/CPAN/Prompt.pm Installing /usr/local/share/perl5/CPAN/FTP/netrc.pm Installing /usr/local/share/perl5/CPAN/Exception/RecursiveDependency.pm Installing /usr/local/share/perl5/CPAN/Exception/yaml_not_installed.pm Installing /usr/local/share/perl5/CPAN/Exception/blocked_urllist.pm Installing /usr/local/share/perl5/CPAN/Exception/yaml_process_error.pm Installing /usr/local/share/perl5/CPAN/Plugin/Specfile.pm Installing /usr/local/share/perl5/CPAN/API/HOWTO.pod Installing /usr/local/share/perl5/CPAN/Kwalify/distroprefs.dd Installing /usr/local/share/perl5/CPAN/Kwalify/distroprefs.yml Installing /usr/local/share/perl5/CPAN/LWP/UserAgent.pm Installing /usr/local/share/perl5/CPAN/HTTP/Client.pm Installing /usr/local/share/perl5/CPAN/HTTP/Credentials.pm Installing /usr/local/share/perl5/App/Cpan.pm Installing /usr/local/share/man/man1/cpan-mirrors.1 Installing /usr/local/share/man/man1/cpan.1 Installing /usr/local/share/man/man3/CPAN::Admin.3pm Installing /usr/local/share/man/man3/CPAN.3pm Installing /usr/local/share/man/man3/CPAN::Tarzip.3pm Installing /usr/local/share/man/man3/CPAN::Version.3pm Installing /usr/local/share/man/man3/CPAN::Kwalify.3pm Installing /usr/local/share/man/man3/CPAN::Mirrors.3pm Installing /usr/local/share/man/man3/CPAN::Nox.3pm Installing /usr/local/share/man/man3/CPAN::FirstTime.3pm Installing /usr/local/share/man/man3/CPAN::Distroprefs.3pm Installing /usr/local/share/man/man3/CPAN::HandleConfig.3pm Installing /usr/local/share/man/man3/CPAN::Queue.3pm Installing /usr/local/share/man/man3/CPAN::Plugin.3pm Installing /usr/local/share/man/man3/CPAN::Debug.3pm Installing /usr/local/share/man/man3/CPAN::API::HOWTO.3pm Installing /usr/local/share/man/man3/App::Cpan.3pm Installing /usr/local/share/man/man3/CPAN::Plugin::Specfile.3pm Installing /usr/local/bin/cpan Installing /usr/local/bin/cpan-mirrors Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed CPAN-2.36 (upgraded from 1.9800) Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/CPAN-2.36/install.json Searching CPAN::Meta::Requirements () on cpanmetadb ... --> Working on CPAN::Meta::Requirements Fetching http://www.cpan.org/authors/id/R/RJ/RJBS/CPAN-Meta-Requirements-2.143.tar.gz -> OK Unpacking CPAN-Meta-Requirements-2.143.tar.gz Entering CPAN-Meta-Requirements-2.143 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68) Configuring CPAN-Meta-Requirements-2.143 Running Makefile.PL Warning: prerequisite version 0.88 not found. Checking if your kit is complete... Looks good Writing Makefile for CPAN::Meta::Requirements -> OK Checking dependencies from META.json ... Checking if you have strict 0 ... Yes (1.07) Checking if you have warnings 0 ... Yes (1.13) Checking if you have version 0.88 ... No Checking if you have B 0 ... Yes (1.35) Checking if you have Carp 0 ... Yes (1.26) ==> Found dependencies: version Searching version (0.88) on cpanmetadb ... --> Working on version Fetching http://www.cpan.org/authors/id/L/LE/LEONT/version-0.9929.tar.gz -> OK Unpacking version-0.9929.tar.gz Entering version-0.9929 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68) Configuring version-0.9929 Running Makefile.PL Testing if you have a C compiler Checking if your kit is complete... Looks good Writing Makefile for version::vxs Writing Makefile for version -> OK -> FAIL No MYMETA file is found after configure. Your toolchain is too old? Building version-0.9929 cp lib/version/Internals.pod blib/lib/version/Internals.pod cp lib/version.pm blib/lib/version.pm cp lib/version/regex.pm blib/lib/version/regex.pm cp lib/version.pod blib/lib/version.pod cp vperl/vpp.pm blib/lib/version/vpp.pm make[1]: Entering directory `/root/.cpanm/work/1693412468.26304/version-0.9929/vutil' cp lib/version/vxs.pm ../blib/lib/version/vxs.pm /usr/bin/perl /usr/share/perl5/vendor_perl/ExtUtils/xsubpp -typemap /usr/share/perl5/ExtUtils/typemap vxs.xs > vxs.xsc && mv vxs.xsc vxs.c gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"0.9929\" -DXS_VERSION=\"0.9929\" -fPIC "-I/usr/lib64/perl5/CORE" vxs.c In file included from vxs.xs:18:0: vutil.c: In function ‘Perl_upg_version2’: vutil.c:635:28: warning: statement with no effect [-Wunused-value] LC_NUMERIC_LOCK(0); /* Start critical section */ ^ Running Mkbootstrap for version::vxs () chmod 644 vxs.bs rm -f ../blib/arch/auto/version/vxs/vxs.so gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wl,-z,relro vxs.o -o ../blib/arch/auto/version/vxs/vxs.so \ \ chmod 755 ../blib/arch/auto/version/vxs/vxs.so cp vxs.bs ../blib/arch/auto/version/vxs/vxs.bs chmod 644 ../blib/arch/auto/version/vxs/vxs.bs make[1]: Leaving directory `/root/.cpanm/work/1693412468.26304/version-0.9929/vutil' Manifying blib/man3/version::Internals.3pm Manifying blib/man3/version.3pm make[1]: Entering directory `/root/.cpanm/work/1693412468.26304/version-0.9929/vutil' make[1]: Leaving directory `/root/.cpanm/work/1693412468.26304/version-0.9929/vutil' Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /usr/local/lib64/perl5/auto/version/vxs/vxs.so Installing /usr/local/lib64/perl5/auto/version/vxs/vxs.bs Installing /usr/local/lib64/perl5/version.pm Installing /usr/local/lib64/perl5/version.pod Installing /usr/local/lib64/perl5/version/Internals.pod Installing /usr/local/lib64/perl5/version/regex.pm Installing /usr/local/lib64/perl5/version/vxs.pm Installing /usr/local/lib64/perl5/version/vpp.pm Installing /usr/local/share/man/man3/version.3pm Installing /usr/local/share/man/man3/version::Internals.3pm Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed version-0.9929 Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/version-0.9929/install.json Building CPAN-Meta-Requirements-2.143 cp lib/CPAN/Meta/Requirements/Range.pm blib/lib/CPAN/Meta/Requirements/Range.pm cp lib/CPAN/Meta/Requirements.pm blib/lib/CPAN/Meta/Requirements.pm Manifying blib/man3/CPAN::Meta::Requirements::Range.3pm Manifying blib/man3/CPAN::Meta::Requirements.3pm Installing /usr/local/share/perl5/CPAN/Meta/Requirements.pm Installing /usr/local/share/perl5/CPAN/Meta/Requirements/Range.pm Installing /usr/local/share/man/man3/CPAN::Meta::Requirements::Range.3pm Installing /usr/local/share/man/man3/CPAN::Meta::Requirements.3pm Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed CPAN-Meta-Requirements-2.143 Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/CPAN-Meta-Requirements-2.143/install.json Searching CPAN::Meta::YAML () on cpanmetadb ... --> Working on CPAN::Meta::YAML Fetching http://www.cpan.org/authors/id/D/DA/DAGOLDEN/CPAN-Meta-YAML-0.018.tar.gz -> OK Unpacking CPAN-Meta-YAML-0.018.tar.gz Entering CPAN-Meta-YAML-0.018 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68) Configuring CPAN-Meta-YAML-0.018 Running Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for CPAN::Meta::YAML -> OK Checking dependencies from META.json ... Checking if you have Scalar::Util 0 ... Yes (1.27) Checking if you have warnings 0 ... Yes (1.13) Checking if you have Fcntl 0 ... Yes (1.11) Checking if you have B 0 ... Yes (1.35) Checking if you have Exporter 0 ... Yes (5.68) Checking if you have Carp 0 ... Yes (1.26) Checking if you have strict 0 ... Yes (1.07) Building CPAN-Meta-YAML-0.018 cp lib/CPAN/Meta/YAML.pm blib/lib/CPAN/Meta/YAML.pm Manifying blib/man3/CPAN::Meta::YAML.3pm Installing /usr/local/share/perl5/CPAN/Meta/YAML.pm Installing /usr/local/share/man/man3/CPAN::Meta::YAML.3pm Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed CPAN-Meta-YAML-0.018 Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/CPAN-Meta-YAML-0.018/install.json Searching Expect () on cpanmetadb ... --> Working on Expect Fetching http://www.cpan.org/authors/id/J/JA/JACOBY/Expect-1.35.tar.gz -> OK Unpacking Expect-1.35.tar.gz Entering Expect-1.35 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.64 ... Yes (6.68) Configuring Expect-1.35 Running Makefile.PL Warning: prerequisite IO::Pty 1.11 not found. We have 1.10. Warning: prerequisite IO::Tty 1.11 not found. We have 1.10. Checking if your kit is complete... Looks good Writing Makefile for Expect -> OK -> FAIL No MYMETA file is found after configure. Your toolchain is too old? Building Expect-1.35 cp lib/Expect.pm blib/lib/Expect.pm Manifying blib/man3/Expect.3pm Installing /usr/local/share/perl5/Expect.pm Installing /usr/local/share/man/man3/Expect.3pm Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed Expect-1.35 (upgraded from 1.21) Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/Expect-1.35/install.json Searching HTTP::Tiny () on cpanmetadb ... --> Working on HTTP::Tiny Fetching http://www.cpan.org/authors/id/D/DA/DAGOLDEN/HTTP-Tiny-0.088.tar.gz -> OK Unpacking HTTP-Tiny-0.088.tar.gz Entering HTTP-Tiny-0.088 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68) Configuring HTTP-Tiny-0.088 Running Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for HTTP::Tiny -> OK Checking dependencies from META.json ... Checking if you have warnings 0 ... Yes (1.13) Checking if you have bytes 0 ... Yes (1.04) Checking if you have Fcntl 0 ... Yes (1.11) Checking if you have Carp 0 ... Yes (1.26) Checking if you have strict 0 ... Yes (1.07) Checking if you have IO::Socket 0 ... Yes (1.34) Checking if you have MIME::Base64 0 ... Yes (3.13) Checking if you have Time::Local 0 ... Yes (1.2300) Checking if you have Socket 0 ... Yes (2.010) Building HTTP-Tiny-0.088 cp lib/HTTP/Tiny.pm blib/lib/HTTP/Tiny.pm Manifying blib/man3/HTTP::Tiny.3pm Installing /usr/local/share/perl5/HTTP/Tiny.pm Installing /usr/local/share/man/man3/HTTP::Tiny.3pm Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed HTTP-Tiny-0.088 (upgraded from 0.033) Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/HTTP-Tiny-0.088/install.json Searching IO::Tty () on cpanmetadb ... --> Working on IO::Tty Fetching http://www.cpan.org/authors/id/T/TO/TODDR/IO-Tty-1.17.tar.gz -> OK Unpacking IO-Tty-1.17.tar.gz Entering IO-Tty-1.17 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68) Configuring IO-Tty-1.17 Running Makefile.PL Now let's see what we can find out about your system (logfiles of failing tests are available in the conf/ dir)... Looking for _getpty()...... not found. Looking for getpt()........ FOUND. Looking for grantpt()...... FOUND. Looking for openpty()...... FOUND. Looking for posix_openpt(). FOUND. Looking for ptsname()...... FOUND. Looking for ptsname_r().... FOUND. Looking for sigaction().... FOUND. Looking for strlcpy()...... not found. Looking for ttyname()...... FOUND. Looking for unlockpt()..... FOUND. Looking for libutil.h...... not found. Looking for pty.h.......... FOUND. Looking for sys/pty.h...... not found. Looking for sys/ptyio.h.... not found. Looking for sys/stropts.h.. not found. Looking for termio.h....... FOUND. Looking for termios.h...... FOUND. Looking for util.h......... not found. Checking which symbols compile OK... (sorry for the tedious check, but some systems have not too clean header files, to say the least; '+' means OK, '-' means not defined and '*' has compile problems...) +B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 -B76800 +B9600 +BRKINT +BS0 +BS1 +BSDLY +CBAUD -CBAUDEXT +CBRK -CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH +CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT +CR0 +CR1 +CR2 +CR3 +CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF -CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB +FF0 +FF1 +FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP +IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS +NL0 +NL1 +NLDLY +NOFLSH +OCRNL +OFDEL +OFILL +OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG +TAB0 +TAB1 +TAB2 +TAB3 +TABDLY -TCDSET +TCFLSH +TCGETA +TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW +TCSBRK +TCSETA +TCSETAF +TCSETAW -TCSETCTTY +TCSETS +TCSETSF +TCSETSW +TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK -TIOCCDTR +TIOCCONS +TIOCEXCL -TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP +TIOCGSID +TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ -TIOCREMOTE +TIOCSBRK +TIOCSCTTY -TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID +TIOCSSOFTCAR -TIOCSTART +TIOCSTI -TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD -VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH +VT0 +VT1 +VTDLY +VTIME +VWERASE -WRAP +XCASE -XCLUDE -XMT1EN +XTABS >>> Configuration looks good! <<< Writing IO::Tty::Constant.pm... DEFINE = -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Checking if your kit is complete... Looks good Writing Makefile for IO::Tty -> OK -> FAIL No MYMETA file is found after configure. Your toolchain is too old? Building IO-Tty-1.17 cp Tty.pm blib/lib/IO/Tty.pm cp Tty/Constant.pm blib/lib/IO/Tty/Constant.pm cp Pty.pm blib/lib/IO/Pty.pm /usr/bin/perl /usr/share/perl5/vendor_perl/ExtUtils/xsubpp -typemap /usr/share/perl5/ExtUtils/typemap Tty.xs > Tty.xsc && mv Tty.xsc Tty.c gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.17\" -DXS_VERSION=\"1.17\" -fPIC "-I/usr/lib64/perl5/CORE" -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Tty.c Running Mkbootstrap for IO::Tty () chmod 644 Tty.bs rm -f blib/arch/auto/IO/Tty/Tty.so gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wl,-z,relro Tty.o -o blib/arch/auto/IO/Tty/Tty.so \ -lutil \ chmod 755 blib/arch/auto/IO/Tty/Tty.so cp Tty.bs blib/arch/auto/IO/Tty/Tty.bs chmod 644 blib/arch/auto/IO/Tty/Tty.bs Manifying blib/man3/IO::Tty::Constant.3pm Manifying blib/man3/IO::Tty.3pm Manifying blib/man3/IO::Pty.3pm Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /usr/local/lib64/perl5/auto/IO/Tty/Tty.bs Installing /usr/local/lib64/perl5/auto/IO/Tty/Tty.so Installing /usr/local/lib64/perl5/IO/Tty.pm Installing /usr/local/lib64/perl5/IO/Pty.pm Installing /usr/local/lib64/perl5/IO/Tty/Constant.pm Installing /usr/local/share/man/man3/IO::Pty.3pm Installing /usr/local/share/man/man3/IO::Tty::Constant.3pm Installing /usr/local/share/man/man3/IO::Tty.3pm Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed IO-Tty-1.17 (upgraded from 1.10) Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/IO-Tty-1.17/install.json Searching JSON::XS () on cpanmetadb ... --> Working on JSON::XS Fetching http://www.cpan.org/authors/id/M/ML/MLEHMANN/JSON-XS-4.03.tar.gz -> OK Unpacking JSON-XS-4.03.tar.gz Entering JSON-XS-4.03 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68) Checking if you have Canary::Stability 0 ... No ==> Found dependencies: Canary::Stability Searching Canary::Stability (0) on cpanmetadb ... --> Working on Canary::Stability Fetching http://www.cpan.org/authors/id/M/ML/MLEHMANN/Canary-Stability-2013.tar.gz -> OK Unpacking Canary-Stability-2013.tar.gz Entering Canary-Stability-2013 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68) Configuring Canary-Stability-2013 Running Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Canary::Stability -> OK -> FAIL No MYMETA file is found after configure. Your toolchain is too old? Building Canary-Stability-2013 cp Stability.pm blib/lib/Canary/Stability.pm Manifying blib/man3/Canary::Stability.3pm Manifying blib/man3/Canary::Stability.3pm Installing /usr/local/share/perl5/Canary/Stability.pm Installing /usr/local/share/man/man3/Canary::Stability.3pm Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed Canary-Stability-2013 Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/Canary-Stability-2013/install.json Configuring JSON-XS-4.03 Running Makefile.PL *** *** Canary::Stability COMPATIBILITY AND SUPPORT CHECK *** ================================================= *** *** Hi! *** *** I do my best to provide predictable and reliable software. *** *** However, in recent releases, P5P (who maintain perl) have been *** introducing regressions that are sometimes subtle and at other times *** catastrophic, often for personal preferences with little or no concern *** for existing code, most notably CPAN. *** *** For this reason, it has become very hard for me to maintain the level *** of reliability and support I have committed myself to in the past, at *** least with some perl versions: I simply can't keep up working around new *** bugs or gratituous incompatibilities, and in turn you might suffer from *** unanticipated problems. *** *** Therefore I have introduced a support and compatibility check, the results *** of which follow below, together with a FAQ and some recommendations. *** *** This check is just to let you know that there might be a risk, so you can *** make judgement calls on how to proceed - it will not keep the module from *** installing or working. *** *** The stability canary says: chirp! chirp! (it seems to be quite happy) *** *** Your version of perl (5.016003) is quite supported by JSON::XS, nothing *** else to be said, hope it comes in handy. *** Checking if your kit is complete... Looks good Writing Makefile for JSON::XS -> OK -> FAIL No MYMETA file is found after configure. Your toolchain is too old? Building JSON-XS-4.03 cp XS/Boolean.pm blib/lib/JSON/XS/Boolean.pm cp XS.pm blib/lib/JSON/XS.pm /usr/bin/perl /usr/share/perl5/vendor_perl/ExtUtils/xsubpp -typemap /usr/share/perl5/ExtUtils/typemap -typemap typemap XS.xs > XS.xsc && mv XS.xsc XS.c gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"4.03\" -DXS_VERSION=\"4.03\" -fPIC "-I/usr/lib64/perl5/CORE" XS.c XS.xs: In function ‘ptr_to_index’: XS.xs:239:10: warning: pointer targets in passing argument 2 of ‘Perl_utf8_distance’ differ in signedness [-Wpointer-sign] ? utf8_distance (offset, SvPVX (sv)) ^ In file included from /usr/lib64/perl5/CORE/perl.h:5032:0, from XS.xs:2: /usr/lib64/perl5/CORE/proto.h:4534:18: note: expected ‘const U8 *’ but argument is of type ‘char *’ PERL_CALLCONV IV Perl_utf8_distance(pTHX_ const U8 *a, const U8 *b) ^ XS.xs:239:10: warning: pointer targets in passing argument 3 of ‘Perl_utf8_distance’ differ in signedness [-Wpointer-sign] ? utf8_distance (offset, SvPVX (sv)) ^ In file included from /usr/lib64/perl5/CORE/perl.h:5032:0, from XS.xs:2: /usr/lib64/perl5/CORE/proto.h:4534:18: note: expected ‘const U8 *’ but argument is of type ‘char *’ PERL_CALLCONV IV Perl_utf8_distance(pTHX_ const U8 *a, const U8 *b) ^ XS.xs: In function ‘ref_bool_type’: XS.xs:350:10: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses] if (len == 1) ^ XS.xs: In function ‘encode_str’: XS.xs:461:23: warning: pointer targets in passing argument 1 of ‘decode_utf8’ differ in signedness [-Wpointer-sign] uch = decode_utf8 (str, end - str, &clen); ^ XS.xs:197:1: note: expected ‘unsigned char *’ but argument is of type ‘char *’ decode_utf8 (unsigned char *s, STRLEN len, STRLEN *clen) ^ XS.xs:514:23: warning: pointer targets in passing argument 1 of ‘encode_utf8’ differ in signedness [-Wpointer-sign] enc->cur = encode_utf8 (enc->cur, uch); ^ XS.xs:214:1: note: expected ‘unsigned char *’ but argument is of type ‘char *’ encode_utf8 (unsigned char *s, UV ch) ^ XS.xs:514:32: warning: pointer targets in assignment differ in signedness [-Wpointer-sign] enc->cur = encode_utf8 (enc->cur, uch); ^ XS.xs: In function ‘decode_str’: XS.xs:1132:26: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses] if (hi >= 0xd800) ^ XS.xs:1158:27: warning: pointer targets in passing argument 1 of ‘encode_utf8’ differ in signedness [-Wpointer-sign] cur = encode_utf8 (cur, hi); ^ XS.xs:214:1: note: expected ‘unsigned char *’ but argument is of type ‘char *’ encode_utf8 (unsigned char *s, UV ch) ^ XS.xs:1158:31: warning: pointer targets in assignment differ in signedness [-Wpointer-sign] cur = encode_utf8 (cur, hi); ^ XS.xs:1178:15: warning: pointer targets in passing argument 1 of ‘decode_utf8’ differ in signedness [-Wpointer-sign] decode_utf8 (dec_cur, dec->end - dec_cur, &clen); ^ XS.xs:197:1: note: expected ‘unsigned char *’ but argument is of type ‘char *’ decode_utf8 (unsigned char *s, STRLEN len, STRLEN *clen) ^ XS.xs: In function ‘decode_num’: XS.xs:1331:12: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses] if (numtype & IS_NUMBER_IN_UV) ^ XS.xs: In function ‘decode_json’: XS.xs:1825:7: warning: pointer targets in passing argument 3 of ‘Perl_pv_uni_display’ differ in signedness [-Wpointer-sign] pv_uni_display (uni, dec.cur, dec.end - dec.cur, 20, UNI_DISPLAY_QQ); ^ In file included from /usr/lib64/perl5/CORE/perl.h:5032:0, from XS.xs:2: /usr/lib64/perl5/CORE/proto.h:3128:21: note: expected ‘const U8 *’ but argument is of type ‘char *’ PERL_CALLCONV char* Perl_pv_uni_display(pTHX_ SV *dsv, const U8 *spv, STRLEN len, STRLEN pvlim, UV flags) ^ XS.xs: In function ‘incr_parse’: XS.xs:1963:26: warning: multi-line comment [-Wcomment] ++p; // "virtually" consumes character after \ ^ XS.xs:2042:7: warning: label ‘modechange’ defined but not used [-Wunused-label] modechange: ^ In file included from XS.xs:3:0: XS.c: In function ‘XS_JSON__XS_CLONE’: /usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable ‘items’ [-Wunused-variable] #define dITEMS I32 items = (I32)(SP - MARK) ^ /usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro ‘dITEMS’ dSP; dAXMARK; dITEMS ^ XS.c:2211:11: note: in expansion of macro ‘dXSARGS’ dVAR; dXSARGS; ^ XS.xs: In function ‘XS_JSON__XS_incr_parse’: XS.xs:2245:12: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses] if (!DECODE_WANTS_OCTETS (self) == !SvUTF8 (self->incr_text)) ^ XS.xs:2267:16: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses] if (SvUTF8 (jsonstr) != SvUTF8 (self->incr_text)) ^ In file included from /usr/lib64/perl5/CORE/perl.h:38:0, from XS.xs:2: XS.xs: In function ‘encode_sv’: /usr/lib64/perl5/CORE/config.h:1422:31: warning: ignoring return value of ‘gcvt’, declared with attribute warn_unused_result [-Wunused-result] #define Gconvert(x,n,t,b) gcvt((x),(n),(b)) ^ XS.xs:910:7: note: in expansion of macro ‘Gconvert’ Gconvert (SvNVX (sv), NV_DIG, 0, enc->cur); ^ Running Mkbootstrap for JSON::XS () chmod 644 XS.bs rm -f blib/arch/auto/JSON/XS/XS.so gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wl,-z,relro XS.o -o blib/arch/auto/JSON/XS/XS.so \ \ chmod 755 blib/arch/auto/JSON/XS/XS.so cp XS.bs blib/arch/auto/JSON/XS/XS.bs chmod 644 blib/arch/auto/JSON/XS/XS.bs cp bin/json_xs blib/script/json_xs /usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/json_xs Manifying blib/man1/json_xs.1 Manifying blib/man3/JSON::XS::Boolean.3pm Manifying blib/man3/JSON::XS.3pm Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /usr/local/lib64/perl5/auto/JSON/XS/XS.bs Installing /usr/local/lib64/perl5/auto/JSON/XS/XS.so Installing /usr/local/lib64/perl5/JSON/XS.pm Installing /usr/local/lib64/perl5/JSON/XS/Boolean.pm Installing /usr/local/share/man/man1/json_xs.1 Installing /usr/local/share/man/man3/JSON::XS.3pm Installing /usr/local/share/man/man3/JSON::XS::Boolean.3pm Installing /usr/local/bin/json_xs Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed JSON-XS-4.03 (upgraded from 3.01) Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/JSON-XS-4.03/install.json Searching local::lib () on cpanmetadb ... --> Working on local::lib Fetching http://www.cpan.org/authors/id/H/HA/HAARG/local-lib-2.000029.tar.gz -> OK Unpacking local-lib-2.000029.tar.gz Entering local-lib-2.000029 Checking configure dependencies from META.json Configuring local-lib-2.000029 Running Makefile.PL Warning: prerequisite ExtUtils::MakeMaker 7.00 not found. We have 6.68. Checking if your kit is complete... Looks good Writing Makefile for local::lib -> OK -> FAIL No MYMETA file is found after configure. Your toolchain is too old? Building local-lib-2.000029 cp lib/POD2/PT_BR/local/lib.pod blib/lib/POD2/PT_BR/local/lib.pod cp lib/lib/core/only.pm blib/lib/lib/core/only.pm cp lib/local/lib.pm blib/lib/local/lib.pm cp lib/POD2/DE/local/lib.pod blib/lib/POD2/DE/local/lib.pod Manifying blib/man3/POD2::PT_BR::local::lib.3pm Manifying blib/man3/lib::core::only.3pm Manifying blib/man3/local::lib.3pm Manifying blib/man3/POD2::DE::local::lib.3pm Installing /usr/local/share/perl5/POD2/PT_BR/local/lib.pod Installing /usr/local/share/perl5/POD2/DE/local/lib.pod Installing /usr/local/share/perl5/lib/core/only.pm Installing /usr/local/share/perl5/local/lib.pm Installing /usr/local/share/man/man3/POD2::DE::local::lib.3pm Installing /usr/local/share/man/man3/POD2::PT_BR::local::lib.3pm Installing /usr/local/share/man/man3/lib::core::only.3pm Installing /usr/local/share/man/man3/local::lib.3pm Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed local-lib-2.000029 (upgraded from 1.008010) Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/local-lib-2.000029/install.json Searching Try::Tiny () on cpanmetadb ... --> Working on Try::Tiny Fetching http://www.cpan.org/authors/id/E/ET/ETHER/Try-Tiny-0.31.tar.gz -> OK Unpacking Try-Tiny-0.31.tar.gz Entering Try-Tiny-0.31 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68) Configuring Try-Tiny-0.31 Running Makefile.PL Checking if your kit is complete... Looks good Wide character in print at /usr/share/perl5/vendor_perl/ExtUtils/MakeMaker.pm line 1054. Wide character in print at /usr/share/perl5/vendor_perl/ExtUtils/MakeMaker.pm line 1054. Writing Makefile for Try::Tiny -> OK Checking dependencies from META.json ... Checking if you have strict 0 ... Yes (1.07) Checking if you have warnings 0 ... Yes (1.13) Checking if you have constant 0 ... Yes (1.27) Checking if you have Exporter 5.57 ... Yes (5.68) Checking if you have Carp 0 ... Yes (1.26) Building Try-Tiny-0.31 cp lib/Try/Tiny.pm blib/lib/Try/Tiny.pm Manifying blib/man3/Try::Tiny.3pm Installing /usr/local/share/perl5/Try/Tiny.pm Installing /usr/local/share/man/man3/Try::Tiny.3pm Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed Try-Tiny-0.31 (upgraded from 0.12) Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/Try-Tiny-0.31/install.json Already tried version. Skipping. Searching YAML::Syck () on cpanmetadb ... --> Working on YAML::Syck Fetching http://www.cpan.org/authors/id/T/TO/TODDR/YAML-Syck-1.34.tar.gz -> OK Unpacking YAML-Syck-1.34.tar.gz Entering YAML-Syck-1.34 Checking configure dependencies from META.json Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68) Configuring YAML-Syck-1.34 Running Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for YAML::Syck -> OK -> FAIL No MYMETA file is found after configure. Your toolchain is too old? Building YAML-Syck-1.34 cp lib/JSON/Syck.pm blib/lib/JSON/Syck.pm cp lib/YAML/Loader/Syck.pm blib/lib/YAML/Loader/Syck.pm cp lib/YAML/Dumper/Syck.pm blib/lib/YAML/Dumper/Syck.pm cp lib/YAML/Syck.pm blib/lib/YAML/Syck.pm gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" bytecode.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" emitter.c emitter.c: In function ‘syck_emitter_escape’: emitter.c:835:13: warning: pointer targets in passing argument 2 of ‘syck_emitter_write’ differ in signedness [-Wpointer-sign] syck_emitter_write( e, src + i, 1 ); ^ emitter.c:290:1: note: expected ‘const char *’ but argument is of type ‘unsigned char *’ syck_emitter_write( SyckEmitter *e, const char *str, long len ) ^ emitter.c: In function ‘syck_emit_1quoted’: emitter.c:847:10: warning: unused variable ‘do_indent’ [-Wunused-variable] char do_indent = 0; ^ gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" gram.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" handler.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" implicit.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" node.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" syck_.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" syck_st.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" token.c token.re: In function ‘sycklex_yaml_utf8’: token.re:544:36: warning: variable ‘lvl’ set but not used [-Wunused-but-set-variable] /usr/bin/perl /usr/share/perl5/vendor_perl/ExtUtils/xsubpp -typemap /usr/share/perl5/ExtUtils/typemap Syck.xs > Syck.xsc && mv Syck.xsc Syck.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" Syck.c In file included from Syck.xs:5:0: perl_syck.h: In function ‘json_syck_mark_emitter’: perl_syck.h:837:5: warning: enumeration value ‘SVt_NULL’ not handled in switch [-Wswitch] switch (SvTYPE(sv)) { ^ perl_syck.h:837:5: warning: enumeration value ‘SVt_BIND’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_IV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_NV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVNV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVMG’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_REGEXP’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVGV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVLV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVCV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVFM’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIO’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_LAST’ not handled in switch [-Wswitch] In file included from Syck.xs:8:0: perl_syck.h: In function ‘yaml_syck_mark_emitter’: perl_syck.h:837:5: warning: enumeration value ‘SVt_NULL’ not handled in switch [-Wswitch] switch (SvTYPE(sv)) { ^ perl_syck.h:837:5: warning: enumeration value ‘SVt_BIND’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_IV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_NV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVNV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVMG’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_REGEXP’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVGV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVLV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVCV’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVFM’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIO’ not handled in switch [-Wswitch] perl_syck.h:837:5: warning: enumeration value ‘SVt_LAST’ not handled in switch [-Wswitch] perl_syck.h: In function ‘yaml_syck_emitter_handler’: perl_syck.h:909:9: warning: enumeration value ‘SVt_NULL’ not handled in switch [-Wswitch] switch (SvTYPE(SvRV(sv))) { ^ perl_syck.h:909:9: warning: enumeration value ‘SVt_BIND’ not handled in switch [-Wswitch] perl_syck.h:909:9: warning: enumeration value ‘SVt_IV’ not handled in switch [-Wswitch] perl_syck.h:909:9: warning: enumeration value ‘SVt_NV’ not handled in switch [-Wswitch] perl_syck.h:909:9: warning: enumeration value ‘SVt_PV’ not handled in switch [-Wswitch] perl_syck.h:909:9: warning: enumeration value ‘SVt_PVIV’ not handled in switch [-Wswitch] perl_syck.h:909:9: warning: enumeration value ‘SVt_PVNV’ not handled in switch [-Wswitch] perl_syck.h:909:9: warning: enumeration value ‘SVt_PVLV’ not handled in switch [-Wswitch] perl_syck.h:909:9: warning: enumeration value ‘SVt_PVFM’ not handled in switch [-Wswitch] perl_syck.h:909:9: warning: enumeration value ‘SVt_PVIO’ not handled in switch [-Wswitch] perl_syck.h:909:9: warning: enumeration value ‘SVt_LAST’ not handled in switch [-Wswitch] Running Mkbootstrap for YAML::Syck () chmod 644 Syck.bs rm -f blib/arch/auto/YAML/Syck/Syck.so gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wl,-z,relro bytecode.o emitter.o gram.o handler.o implicit.o node.o syck_.o syck_st.o token.o Syck.o -o blib/arch/auto/YAML/Syck/Syck.so \ \ chmod 755 blib/arch/auto/YAML/Syck/Syck.so cp Syck.bs blib/arch/auto/YAML/Syck/Syck.bs chmod 644 blib/arch/auto/YAML/Syck/Syck.bs Manifying blib/man3/JSON::Syck.3pm Manifying blib/man3/YAML::Syck.3pm Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /usr/local/lib64/perl5/auto/YAML/Syck/Syck.bs Installing /usr/local/lib64/perl5/auto/YAML/Syck/Syck.so Installing /usr/local/lib64/perl5/YAML/Syck.pm Installing /usr/local/lib64/perl5/YAML/Loader/Syck.pm Installing /usr/local/lib64/perl5/YAML/Dumper/Syck.pm Installing /usr/local/lib64/perl5/JSON/Syck.pm Installing /usr/local/share/man/man3/YAML::Syck.3pm Installing /usr/local/share/man/man3/JSON::Syck.3pm Appending installation info to /usr/lib64/perl5/perllocal.pod -> OK Successfully installed YAML-Syck-1.34 (upgraded from 1.27) Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/YAML-Syck-1.34/install.json 12 distributions installed