AlkantarClanX12
Your IP : 216.73.216.114
| Current Path : /root/.cpanm/ |
|
|
| Current File : //root/.cpanm/build.log |
cpanm (App::cpanminus) 1.9019 on perl 5.016003 built for x86_64-linux-thread-multi
Work directory is /root/.cpanm/work/1693412468.26304
You have make /bin/make
You have LWP: 6.05
You have /bin/tar: tar (GNU tar) 1.26
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
You have /bin/unzip
Searching CPAN () on cpanmetadb ...
--> Working on CPAN
Fetching http://www.cpan.org/authors/id/A/AN/ANDK/CPAN-2.36.tar.gz
-> OK
Unpacking CPAN-2.36.tar.gz
Entering CPAN-2.36
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68)
Configuring CPAN-2.36
Running Makefile.PL
Importing PAUSE public key into your GnuPG keychain... done!
(You may wish to trust it locally with 'gpg --lsign-key 2E66557AB97C19C791AF8E20328DA867450F89EC')
Checking if your kit is complete...
Looks good
Warning: prerequisite CPAN::Meta::Requirements 2.121 not found.
Writing Makefile for CPAN
-> OK
-> FAIL No MYMETA file is found after configure. Your toolchain is too old?
Building CPAN-2.36
cp lib/CPAN.pm blib/lib/CPAN.pm
cp lib/CPAN/CacheMgr.pm blib/lib/CPAN/CacheMgr.pm
cp lib/CPAN/FTP/netrc.pm blib/lib/CPAN/FTP/netrc.pm
cp lib/CPAN/LWP/UserAgent.pm blib/lib/CPAN/LWP/UserAgent.pm
cp lib/CPAN/FTP.pm blib/lib/CPAN/FTP.pm
cp lib/CPAN/Queue.pm blib/lib/CPAN/Queue.pm
cp lib/CPAN/Distroprefs.pm blib/lib/CPAN/Distroprefs.pm
cp lib/CPAN/Kwalify/distroprefs.yml blib/lib/CPAN/Kwalify/distroprefs.yml
cp lib/App/Cpan.pm blib/lib/App/Cpan.pm
cp lib/CPAN/Kwalify.pm blib/lib/CPAN/Kwalify.pm
cp lib/CPAN/Module.pm blib/lib/CPAN/Module.pm
cp lib/CPAN/Author.pm blib/lib/CPAN/Author.pm
cp lib/CPAN/Debug.pm blib/lib/CPAN/Debug.pm
cp lib/CPAN/HTTP/Credentials.pm blib/lib/CPAN/HTTP/Credentials.pm
cp lib/CPAN/API/HOWTO.pod blib/lib/CPAN/API/HOWTO.pod
cp lib/CPAN/Complete.pm blib/lib/CPAN/Complete.pm
cp lib/CPAN/HTTP/Client.pm blib/lib/CPAN/HTTP/Client.pm
cp lib/CPAN/FirstTime.pm blib/lib/CPAN/FirstTime.pm
cp lib/CPAN/Distrostatus.pm blib/lib/CPAN/Distrostatus.pm
cp lib/CPAN/Exception/blocked_urllist.pm blib/lib/CPAN/Exception/blocked_urllist.pm
cp lib/CPAN/Tarzip.pm blib/lib/CPAN/Tarzip.pm
cp lib/CPAN/Admin.pm blib/lib/CPAN/Admin.pm
cp lib/CPAN/Prompt.pm blib/lib/CPAN/Prompt.pm
cp lib/CPAN/URL.pm blib/lib/CPAN/URL.pm
cp lib/CPAN/Version.pm blib/lib/CPAN/Version.pm
cp lib/CPAN/DeferredCode.pm blib/lib/CPAN/DeferredCode.pm
cp lib/CPAN/Distribution.pm blib/lib/CPAN/Distribution.pm
cp lib/CPAN/Nox.pm blib/lib/CPAN/Nox.pm
cp lib/CPAN/Bundle.pm blib/lib/CPAN/Bundle.pm
cp lib/CPAN/Exception/RecursiveDependency.pm blib/lib/CPAN/Exception/RecursiveDependency.pm
cp lib/CPAN/Plugin/Specfile.pm blib/lib/CPAN/Plugin/Specfile.pm
cp lib/CPAN/Shell.pm blib/lib/CPAN/Shell.pm
cp lib/CPAN/HandleConfig.pm blib/lib/CPAN/HandleConfig.pm
cp lib/CPAN/InfoObj.pm blib/lib/CPAN/InfoObj.pm
cp lib/CPAN/Exception/yaml_process_error.pm blib/lib/CPAN/Exception/yaml_process_error.pm
cp lib/CPAN/Exception/yaml_not_installed.pm blib/lib/CPAN/Exception/yaml_not_installed.pm
cp lib/CPAN/Plugin.pm blib/lib/CPAN/Plugin.pm
cp lib/CPAN/Index.pm blib/lib/CPAN/Index.pm
cp lib/CPAN/Kwalify/distroprefs.dd blib/lib/CPAN/Kwalify/distroprefs.dd
cp lib/CPAN/Mirrors.pm blib/lib/CPAN/Mirrors.pm
cp scripts/cpan-mirrors blib/script/cpan-mirrors
/usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpan-mirrors
cp scripts/cpan blib/script/cpan
/usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpan
Manifying blib/man1/cpan-mirrors.1
Manifying blib/man1/cpan.1
Manifying blib/man3/CPAN.3pm
Manifying blib/man3/CPAN::Tarzip.3pm
Manifying blib/man3/CPAN::Admin.3pm
Manifying blib/man3/CPAN::Queue.3pm
Manifying blib/man3/CPAN::Distroprefs.3pm
Manifying blib/man3/CPAN::Version.3pm
Manifying blib/man3/App::Cpan.3pm
Manifying blib/man3/CPAN::Kwalify.3pm
Manifying blib/man3/CPAN::Nox.3pm
Manifying blib/man3/CPAN::Plugin::Specfile.3pm
Manifying blib/man3/CPAN::Debug.3pm
Manifying blib/man3/CPAN::HandleConfig.3pm
Manifying blib/man3/CPAN::Plugin.3pm
Manifying blib/man3/CPAN::API::HOWTO.3pm
Manifying blib/man3/CPAN::Mirrors.3pm
Manifying blib/man3/CPAN::FirstTime.3pm
Installing /usr/local/share/perl5/CPAN.pm
Installing /usr/local/share/perl5/CPAN/HandleConfig.pm
Installing /usr/local/share/perl5/CPAN/Distrostatus.pm
Installing /usr/local/share/perl5/CPAN/FTP.pm
Installing /usr/local/share/perl5/CPAN/Plugin.pm
Installing /usr/local/share/perl5/CPAN/Distribution.pm
Installing /usr/local/share/perl5/CPAN/CacheMgr.pm
Installing /usr/local/share/perl5/CPAN/Version.pm
Installing /usr/local/share/perl5/CPAN/FirstTime.pm
Installing /usr/local/share/perl5/CPAN/Index.pm
Installing /usr/local/share/perl5/CPAN/DeferredCode.pm
Installing /usr/local/share/perl5/CPAN/Bundle.pm
Installing /usr/local/share/perl5/CPAN/InfoObj.pm
Installing /usr/local/share/perl5/CPAN/Complete.pm
Installing /usr/local/share/perl5/CPAN/URL.pm
Installing /usr/local/share/perl5/CPAN/Module.pm
Installing /usr/local/share/perl5/CPAN/Mirrors.pm
Installing /usr/local/share/perl5/CPAN/Queue.pm
Installing /usr/local/share/perl5/CPAN/Nox.pm
Installing /usr/local/share/perl5/CPAN/Shell.pm
Installing /usr/local/share/perl5/CPAN/Author.pm
Installing /usr/local/share/perl5/CPAN/Tarzip.pm
Installing /usr/local/share/perl5/CPAN/Kwalify.pm
Installing /usr/local/share/perl5/CPAN/Admin.pm
Installing /usr/local/share/perl5/CPAN/Debug.pm
Installing /usr/local/share/perl5/CPAN/Distroprefs.pm
Installing /usr/local/share/perl5/CPAN/Prompt.pm
Installing /usr/local/share/perl5/CPAN/FTP/netrc.pm
Installing /usr/local/share/perl5/CPAN/Exception/RecursiveDependency.pm
Installing /usr/local/share/perl5/CPAN/Exception/yaml_not_installed.pm
Installing /usr/local/share/perl5/CPAN/Exception/blocked_urllist.pm
Installing /usr/local/share/perl5/CPAN/Exception/yaml_process_error.pm
Installing /usr/local/share/perl5/CPAN/Plugin/Specfile.pm
Installing /usr/local/share/perl5/CPAN/API/HOWTO.pod
Installing /usr/local/share/perl5/CPAN/Kwalify/distroprefs.dd
Installing /usr/local/share/perl5/CPAN/Kwalify/distroprefs.yml
Installing /usr/local/share/perl5/CPAN/LWP/UserAgent.pm
Installing /usr/local/share/perl5/CPAN/HTTP/Client.pm
Installing /usr/local/share/perl5/CPAN/HTTP/Credentials.pm
Installing /usr/local/share/perl5/App/Cpan.pm
Installing /usr/local/share/man/man1/cpan-mirrors.1
Installing /usr/local/share/man/man1/cpan.1
Installing /usr/local/share/man/man3/CPAN::Admin.3pm
Installing /usr/local/share/man/man3/CPAN.3pm
Installing /usr/local/share/man/man3/CPAN::Tarzip.3pm
Installing /usr/local/share/man/man3/CPAN::Version.3pm
Installing /usr/local/share/man/man3/CPAN::Kwalify.3pm
Installing /usr/local/share/man/man3/CPAN::Mirrors.3pm
Installing /usr/local/share/man/man3/CPAN::Nox.3pm
Installing /usr/local/share/man/man3/CPAN::FirstTime.3pm
Installing /usr/local/share/man/man3/CPAN::Distroprefs.3pm
Installing /usr/local/share/man/man3/CPAN::HandleConfig.3pm
Installing /usr/local/share/man/man3/CPAN::Queue.3pm
Installing /usr/local/share/man/man3/CPAN::Plugin.3pm
Installing /usr/local/share/man/man3/CPAN::Debug.3pm
Installing /usr/local/share/man/man3/CPAN::API::HOWTO.3pm
Installing /usr/local/share/man/man3/App::Cpan.3pm
Installing /usr/local/share/man/man3/CPAN::Plugin::Specfile.3pm
Installing /usr/local/bin/cpan
Installing /usr/local/bin/cpan-mirrors
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed CPAN-2.36 (upgraded from 1.9800)
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/CPAN-2.36/install.json
Searching CPAN::Meta::Requirements () on cpanmetadb ...
--> Working on CPAN::Meta::Requirements
Fetching http://www.cpan.org/authors/id/R/RJ/RJBS/CPAN-Meta-Requirements-2.143.tar.gz
-> OK
Unpacking CPAN-Meta-Requirements-2.143.tar.gz
Entering CPAN-Meta-Requirements-2.143
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68)
Configuring CPAN-Meta-Requirements-2.143
Running Makefile.PL
Warning: prerequisite version 0.88 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for CPAN::Meta::Requirements
-> OK
Checking dependencies from META.json ...
Checking if you have strict 0 ... Yes (1.07)
Checking if you have warnings 0 ... Yes (1.13)
Checking if you have version 0.88 ... No
Checking if you have B 0 ... Yes (1.35)
Checking if you have Carp 0 ... Yes (1.26)
==> Found dependencies: version
Searching version (0.88) on cpanmetadb ...
--> Working on version
Fetching http://www.cpan.org/authors/id/L/LE/LEONT/version-0.9929.tar.gz
-> OK
Unpacking version-0.9929.tar.gz
Entering version-0.9929
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68)
Configuring version-0.9929
Running Makefile.PL
Testing if you have a C compiler
Checking if your kit is complete...
Looks good
Writing Makefile for version::vxs
Writing Makefile for version
-> OK
-> FAIL No MYMETA file is found after configure. Your toolchain is too old?
Building version-0.9929
cp lib/version/Internals.pod blib/lib/version/Internals.pod
cp lib/version.pm blib/lib/version.pm
cp lib/version/regex.pm blib/lib/version/regex.pm
cp lib/version.pod blib/lib/version.pod
cp vperl/vpp.pm blib/lib/version/vpp.pm
make[1]: Entering directory `/root/.cpanm/work/1693412468.26304/version-0.9929/vutil'
cp lib/version/vxs.pm ../blib/lib/version/vxs.pm
/usr/bin/perl /usr/share/perl5/vendor_perl/ExtUtils/xsubpp -typemap /usr/share/perl5/ExtUtils/typemap vxs.xs > vxs.xsc && mv vxs.xsc vxs.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"0.9929\" -DXS_VERSION=\"0.9929\" -fPIC "-I/usr/lib64/perl5/CORE" vxs.c
In file included from vxs.xs:18:0:
vutil.c: In function ‘Perl_upg_version2’:
vutil.c:635:28: warning: statement with no effect [-Wunused-value]
LC_NUMERIC_LOCK(0); /* Start critical section */
^
Running Mkbootstrap for version::vxs ()
chmod 644 vxs.bs
rm -f ../blib/arch/auto/version/vxs/vxs.so
gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wl,-z,relro vxs.o -o ../blib/arch/auto/version/vxs/vxs.so \
\
chmod 755 ../blib/arch/auto/version/vxs/vxs.so
cp vxs.bs ../blib/arch/auto/version/vxs/vxs.bs
chmod 644 ../blib/arch/auto/version/vxs/vxs.bs
make[1]: Leaving directory `/root/.cpanm/work/1693412468.26304/version-0.9929/vutil'
Manifying blib/man3/version::Internals.3pm
Manifying blib/man3/version.3pm
make[1]: Entering directory `/root/.cpanm/work/1693412468.26304/version-0.9929/vutil'
make[1]: Leaving directory `/root/.cpanm/work/1693412468.26304/version-0.9929/vutil'
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib64/perl5/auto/version/vxs/vxs.so
Installing /usr/local/lib64/perl5/auto/version/vxs/vxs.bs
Installing /usr/local/lib64/perl5/version.pm
Installing /usr/local/lib64/perl5/version.pod
Installing /usr/local/lib64/perl5/version/Internals.pod
Installing /usr/local/lib64/perl5/version/regex.pm
Installing /usr/local/lib64/perl5/version/vxs.pm
Installing /usr/local/lib64/perl5/version/vpp.pm
Installing /usr/local/share/man/man3/version.3pm
Installing /usr/local/share/man/man3/version::Internals.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed version-0.9929
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/version-0.9929/install.json
Building CPAN-Meta-Requirements-2.143
cp lib/CPAN/Meta/Requirements/Range.pm blib/lib/CPAN/Meta/Requirements/Range.pm
cp lib/CPAN/Meta/Requirements.pm blib/lib/CPAN/Meta/Requirements.pm
Manifying blib/man3/CPAN::Meta::Requirements::Range.3pm
Manifying blib/man3/CPAN::Meta::Requirements.3pm
Installing /usr/local/share/perl5/CPAN/Meta/Requirements.pm
Installing /usr/local/share/perl5/CPAN/Meta/Requirements/Range.pm
Installing /usr/local/share/man/man3/CPAN::Meta::Requirements::Range.3pm
Installing /usr/local/share/man/man3/CPAN::Meta::Requirements.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed CPAN-Meta-Requirements-2.143
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/CPAN-Meta-Requirements-2.143/install.json
Searching CPAN::Meta::YAML () on cpanmetadb ...
--> Working on CPAN::Meta::YAML
Fetching http://www.cpan.org/authors/id/D/DA/DAGOLDEN/CPAN-Meta-YAML-0.018.tar.gz
-> OK
Unpacking CPAN-Meta-YAML-0.018.tar.gz
Entering CPAN-Meta-YAML-0.018
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68)
Configuring CPAN-Meta-YAML-0.018
Running Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for CPAN::Meta::YAML
-> OK
Checking dependencies from META.json ...
Checking if you have Scalar::Util 0 ... Yes (1.27)
Checking if you have warnings 0 ... Yes (1.13)
Checking if you have Fcntl 0 ... Yes (1.11)
Checking if you have B 0 ... Yes (1.35)
Checking if you have Exporter 0 ... Yes (5.68)
Checking if you have Carp 0 ... Yes (1.26)
Checking if you have strict 0 ... Yes (1.07)
Building CPAN-Meta-YAML-0.018
cp lib/CPAN/Meta/YAML.pm blib/lib/CPAN/Meta/YAML.pm
Manifying blib/man3/CPAN::Meta::YAML.3pm
Installing /usr/local/share/perl5/CPAN/Meta/YAML.pm
Installing /usr/local/share/man/man3/CPAN::Meta::YAML.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed CPAN-Meta-YAML-0.018
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/CPAN-Meta-YAML-0.018/install.json
Searching Expect () on cpanmetadb ...
--> Working on Expect
Fetching http://www.cpan.org/authors/id/J/JA/JACOBY/Expect-1.35.tar.gz
-> OK
Unpacking Expect-1.35.tar.gz
Entering Expect-1.35
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.64 ... Yes (6.68)
Configuring Expect-1.35
Running Makefile.PL
Warning: prerequisite IO::Pty 1.11 not found. We have 1.10.
Warning: prerequisite IO::Tty 1.11 not found. We have 1.10.
Checking if your kit is complete...
Looks good
Writing Makefile for Expect
-> OK
-> FAIL No MYMETA file is found after configure. Your toolchain is too old?
Building Expect-1.35
cp lib/Expect.pm blib/lib/Expect.pm
Manifying blib/man3/Expect.3pm
Installing /usr/local/share/perl5/Expect.pm
Installing /usr/local/share/man/man3/Expect.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed Expect-1.35 (upgraded from 1.21)
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/Expect-1.35/install.json
Searching HTTP::Tiny () on cpanmetadb ...
--> Working on HTTP::Tiny
Fetching http://www.cpan.org/authors/id/D/DA/DAGOLDEN/HTTP-Tiny-0.088.tar.gz
-> OK
Unpacking HTTP-Tiny-0.088.tar.gz
Entering HTTP-Tiny-0.088
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68)
Configuring HTTP-Tiny-0.088
Running Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for HTTP::Tiny
-> OK
Checking dependencies from META.json ...
Checking if you have warnings 0 ... Yes (1.13)
Checking if you have bytes 0 ... Yes (1.04)
Checking if you have Fcntl 0 ... Yes (1.11)
Checking if you have Carp 0 ... Yes (1.26)
Checking if you have strict 0 ... Yes (1.07)
Checking if you have IO::Socket 0 ... Yes (1.34)
Checking if you have MIME::Base64 0 ... Yes (3.13)
Checking if you have Time::Local 0 ... Yes (1.2300)
Checking if you have Socket 0 ... Yes (2.010)
Building HTTP-Tiny-0.088
cp lib/HTTP/Tiny.pm blib/lib/HTTP/Tiny.pm
Manifying blib/man3/HTTP::Tiny.3pm
Installing /usr/local/share/perl5/HTTP/Tiny.pm
Installing /usr/local/share/man/man3/HTTP::Tiny.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed HTTP-Tiny-0.088 (upgraded from 0.033)
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/HTTP-Tiny-0.088/install.json
Searching IO::Tty () on cpanmetadb ...
--> Working on IO::Tty
Fetching http://www.cpan.org/authors/id/T/TO/TODDR/IO-Tty-1.17.tar.gz
-> OK
Unpacking IO-Tty-1.17.tar.gz
Entering IO-Tty-1.17
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68)
Configuring IO-Tty-1.17
Running Makefile.PL
Now let's see what we can find out about your system
(logfiles of failing tests are available in the conf/ dir)...
Looking for _getpty()...... not found.
Looking for getpt()........ FOUND.
Looking for grantpt()...... FOUND.
Looking for openpty()...... FOUND.
Looking for posix_openpt(). FOUND.
Looking for ptsname()...... FOUND.
Looking for ptsname_r().... FOUND.
Looking for sigaction().... FOUND.
Looking for strlcpy()...... not found.
Looking for ttyname()...... FOUND.
Looking for unlockpt()..... FOUND.
Looking for libutil.h...... not found.
Looking for pty.h.......... FOUND.
Looking for sys/pty.h...... not found.
Looking for sys/ptyio.h.... not found.
Looking for sys/stropts.h.. not found.
Looking for termio.h....... FOUND.
Looking for termios.h...... FOUND.
Looking for util.h......... not found.
Checking which symbols compile OK...
(sorry for the tedious check, but some systems have not too clean
header files, to say the least; '+' means OK, '-' means not defined
and '*' has compile problems...)
+B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 -B76800 +B9600 +BRKINT +BS0 +BS1 +BSDLY +CBAUD -CBAUDEXT +CBRK -CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH +CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT +CR0 +CR1 +CR2 +CR3 +CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF -CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB +FF0 +FF1 +FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP +IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS +NL0 +NL1 +NLDLY +NOFLSH +OCRNL +OFDEL +OFILL +OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG +TAB0 +TAB1 +TAB2 +TAB3 +TABDLY -TCDSET +TCFLSH +TCGETA +TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW +TCSBRK +TCSETA +TCSETAF +TCSETAW -TCSETCTTY +TCSETS +TCSETSF +TCSETSW +TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK -TIOCCDTR +TIOCCONS +TIOCEXCL -TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP +TIOCGSID +TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ -TIOCREMOTE +TIOCSBRK +TIOCSCTTY -TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID +TIOCSSOFTCAR -TIOCSTART +TIOCSTI -TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD -VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH +VT0 +VT1 +VTDLY +VTIME +VWERASE -WRAP +XCASE -XCLUDE -XMT1EN +XTABS
>>> Configuration looks good! <<<
Writing IO::Tty::Constant.pm...
DEFINE = -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT
Checking if your kit is complete...
Looks good
Writing Makefile for IO::Tty
-> OK
-> FAIL No MYMETA file is found after configure. Your toolchain is too old?
Building IO-Tty-1.17
cp Tty.pm blib/lib/IO/Tty.pm
cp Tty/Constant.pm blib/lib/IO/Tty/Constant.pm
cp Pty.pm blib/lib/IO/Pty.pm
/usr/bin/perl /usr/share/perl5/vendor_perl/ExtUtils/xsubpp -typemap /usr/share/perl5/ExtUtils/typemap Tty.xs > Tty.xsc && mv Tty.xsc Tty.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.17\" -DXS_VERSION=\"1.17\" -fPIC "-I/usr/lib64/perl5/CORE" -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Tty.c
Running Mkbootstrap for IO::Tty ()
chmod 644 Tty.bs
rm -f blib/arch/auto/IO/Tty/Tty.so
gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wl,-z,relro Tty.o -o blib/arch/auto/IO/Tty/Tty.so \
-lutil \
chmod 755 blib/arch/auto/IO/Tty/Tty.so
cp Tty.bs blib/arch/auto/IO/Tty/Tty.bs
chmod 644 blib/arch/auto/IO/Tty/Tty.bs
Manifying blib/man3/IO::Tty::Constant.3pm
Manifying blib/man3/IO::Tty.3pm
Manifying blib/man3/IO::Pty.3pm
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib64/perl5/auto/IO/Tty/Tty.bs
Installing /usr/local/lib64/perl5/auto/IO/Tty/Tty.so
Installing /usr/local/lib64/perl5/IO/Tty.pm
Installing /usr/local/lib64/perl5/IO/Pty.pm
Installing /usr/local/lib64/perl5/IO/Tty/Constant.pm
Installing /usr/local/share/man/man3/IO::Pty.3pm
Installing /usr/local/share/man/man3/IO::Tty::Constant.3pm
Installing /usr/local/share/man/man3/IO::Tty.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed IO-Tty-1.17 (upgraded from 1.10)
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/IO-Tty-1.17/install.json
Searching JSON::XS () on cpanmetadb ...
--> Working on JSON::XS
Fetching http://www.cpan.org/authors/id/M/ML/MLEHMANN/JSON-XS-4.03.tar.gz
-> OK
Unpacking JSON-XS-4.03.tar.gz
Entering JSON-XS-4.03
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68)
Checking if you have Canary::Stability 0 ... No
==> Found dependencies: Canary::Stability
Searching Canary::Stability (0) on cpanmetadb ...
--> Working on Canary::Stability
Fetching http://www.cpan.org/authors/id/M/ML/MLEHMANN/Canary-Stability-2013.tar.gz
-> OK
Unpacking Canary-Stability-2013.tar.gz
Entering Canary-Stability-2013
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68)
Configuring Canary-Stability-2013
Running Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Canary::Stability
-> OK
-> FAIL No MYMETA file is found after configure. Your toolchain is too old?
Building Canary-Stability-2013
cp Stability.pm blib/lib/Canary/Stability.pm
Manifying blib/man3/Canary::Stability.3pm
Manifying blib/man3/Canary::Stability.3pm
Installing /usr/local/share/perl5/Canary/Stability.pm
Installing /usr/local/share/man/man3/Canary::Stability.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed Canary-Stability-2013
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/Canary-Stability-2013/install.json
Configuring JSON-XS-4.03
Running Makefile.PL
***
*** Canary::Stability COMPATIBILITY AND SUPPORT CHECK
*** =================================================
***
*** Hi!
***
*** I do my best to provide predictable and reliable software.
***
*** However, in recent releases, P5P (who maintain perl) have been
*** introducing regressions that are sometimes subtle and at other times
*** catastrophic, often for personal preferences with little or no concern
*** for existing code, most notably CPAN.
***
*** For this reason, it has become very hard for me to maintain the level
*** of reliability and support I have committed myself to in the past, at
*** least with some perl versions: I simply can't keep up working around new
*** bugs or gratituous incompatibilities, and in turn you might suffer from
*** unanticipated problems.
***
*** Therefore I have introduced a support and compatibility check, the results
*** of which follow below, together with a FAQ and some recommendations.
***
*** This check is just to let you know that there might be a risk, so you can
*** make judgement calls on how to proceed - it will not keep the module from
*** installing or working.
***
*** The stability canary says: chirp! chirp! (it seems to be quite happy)
***
*** Your version of perl (5.016003) is quite supported by JSON::XS, nothing
*** else to be said, hope it comes in handy.
***
Checking if your kit is complete...
Looks good
Writing Makefile for JSON::XS
-> OK
-> FAIL No MYMETA file is found after configure. Your toolchain is too old?
Building JSON-XS-4.03
cp XS/Boolean.pm blib/lib/JSON/XS/Boolean.pm
cp XS.pm blib/lib/JSON/XS.pm
/usr/bin/perl /usr/share/perl5/vendor_perl/ExtUtils/xsubpp -typemap /usr/share/perl5/ExtUtils/typemap -typemap typemap XS.xs > XS.xsc && mv XS.xsc XS.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"4.03\" -DXS_VERSION=\"4.03\" -fPIC "-I/usr/lib64/perl5/CORE" XS.c
XS.xs: In function ‘ptr_to_index’:
XS.xs:239:10: warning: pointer targets in passing argument 2 of ‘Perl_utf8_distance’ differ in signedness [-Wpointer-sign]
? utf8_distance (offset, SvPVX (sv))
^
In file included from /usr/lib64/perl5/CORE/perl.h:5032:0,
from XS.xs:2:
/usr/lib64/perl5/CORE/proto.h:4534:18: note: expected ‘const U8 *’ but argument is of type ‘char *’
PERL_CALLCONV IV Perl_utf8_distance(pTHX_ const U8 *a, const U8 *b)
^
XS.xs:239:10: warning: pointer targets in passing argument 3 of ‘Perl_utf8_distance’ differ in signedness [-Wpointer-sign]
? utf8_distance (offset, SvPVX (sv))
^
In file included from /usr/lib64/perl5/CORE/perl.h:5032:0,
from XS.xs:2:
/usr/lib64/perl5/CORE/proto.h:4534:18: note: expected ‘const U8 *’ but argument is of type ‘char *’
PERL_CALLCONV IV Perl_utf8_distance(pTHX_ const U8 *a, const U8 *b)
^
XS.xs: In function ‘ref_bool_type’:
XS.xs:350:10: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses]
if (len == 1)
^
XS.xs: In function ‘encode_str’:
XS.xs:461:23: warning: pointer targets in passing argument 1 of ‘decode_utf8’ differ in signedness [-Wpointer-sign]
uch = decode_utf8 (str, end - str, &clen);
^
XS.xs:197:1: note: expected ‘unsigned char *’ but argument is of type ‘char *’
decode_utf8 (unsigned char *s, STRLEN len, STRLEN *clen)
^
XS.xs:514:23: warning: pointer targets in passing argument 1 of ‘encode_utf8’ differ in signedness [-Wpointer-sign]
enc->cur = encode_utf8 (enc->cur, uch);
^
XS.xs:214:1: note: expected ‘unsigned char *’ but argument is of type ‘char *’
encode_utf8 (unsigned char *s, UV ch)
^
XS.xs:514:32: warning: pointer targets in assignment differ in signedness [-Wpointer-sign]
enc->cur = encode_utf8 (enc->cur, uch);
^
XS.xs: In function ‘decode_str’:
XS.xs:1132:26: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses]
if (hi >= 0xd800)
^
XS.xs:1158:27: warning: pointer targets in passing argument 1 of ‘encode_utf8’ differ in signedness [-Wpointer-sign]
cur = encode_utf8 (cur, hi);
^
XS.xs:214:1: note: expected ‘unsigned char *’ but argument is of type ‘char *’
encode_utf8 (unsigned char *s, UV ch)
^
XS.xs:1158:31: warning: pointer targets in assignment differ in signedness [-Wpointer-sign]
cur = encode_utf8 (cur, hi);
^
XS.xs:1178:15: warning: pointer targets in passing argument 1 of ‘decode_utf8’ differ in signedness [-Wpointer-sign]
decode_utf8 (dec_cur, dec->end - dec_cur, &clen);
^
XS.xs:197:1: note: expected ‘unsigned char *’ but argument is of type ‘char *’
decode_utf8 (unsigned char *s, STRLEN len, STRLEN *clen)
^
XS.xs: In function ‘decode_num’:
XS.xs:1331:12: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses]
if (numtype & IS_NUMBER_IN_UV)
^
XS.xs: In function ‘decode_json’:
XS.xs:1825:7: warning: pointer targets in passing argument 3 of ‘Perl_pv_uni_display’ differ in signedness [-Wpointer-sign]
pv_uni_display (uni, dec.cur, dec.end - dec.cur, 20, UNI_DISPLAY_QQ);
^
In file included from /usr/lib64/perl5/CORE/perl.h:5032:0,
from XS.xs:2:
/usr/lib64/perl5/CORE/proto.h:3128:21: note: expected ‘const U8 *’ but argument is of type ‘char *’
PERL_CALLCONV char* Perl_pv_uni_display(pTHX_ SV *dsv, const U8 *spv, STRLEN len, STRLEN pvlim, UV flags)
^
XS.xs: In function ‘incr_parse’:
XS.xs:1963:26: warning: multi-line comment [-Wcomment]
++p; // "virtually" consumes character after \
^
XS.xs:2042:7: warning: label ‘modechange’ defined but not used [-Wunused-label]
modechange:
^
In file included from XS.xs:3:0:
XS.c: In function ‘XS_JSON__XS_CLONE’:
/usr/lib64/perl5/CORE/XSUB.h:164:20: warning: unused variable ‘items’ [-Wunused-variable]
#define dITEMS I32 items = (I32)(SP - MARK)
^
/usr/lib64/perl5/CORE/XSUB.h:172:16: note: in expansion of macro ‘dITEMS’
dSP; dAXMARK; dITEMS
^
XS.c:2211:11: note: in expansion of macro ‘dXSARGS’
dVAR; dXSARGS;
^
XS.xs: In function ‘XS_JSON__XS_incr_parse’:
XS.xs:2245:12: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses]
if (!DECODE_WANTS_OCTETS (self) == !SvUTF8 (self->incr_text))
^
XS.xs:2267:16: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses]
if (SvUTF8 (jsonstr) != SvUTF8 (self->incr_text))
^
In file included from /usr/lib64/perl5/CORE/perl.h:38:0,
from XS.xs:2:
XS.xs: In function ‘encode_sv’:
/usr/lib64/perl5/CORE/config.h:1422:31: warning: ignoring return value of ‘gcvt’, declared with attribute warn_unused_result [-Wunused-result]
#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
^
XS.xs:910:7: note: in expansion of macro ‘Gconvert’
Gconvert (SvNVX (sv), NV_DIG, 0, enc->cur);
^
Running Mkbootstrap for JSON::XS ()
chmod 644 XS.bs
rm -f blib/arch/auto/JSON/XS/XS.so
gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wl,-z,relro XS.o -o blib/arch/auto/JSON/XS/XS.so \
\
chmod 755 blib/arch/auto/JSON/XS/XS.so
cp XS.bs blib/arch/auto/JSON/XS/XS.bs
chmod 644 blib/arch/auto/JSON/XS/XS.bs
cp bin/json_xs blib/script/json_xs
/usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/json_xs
Manifying blib/man1/json_xs.1
Manifying blib/man3/JSON::XS::Boolean.3pm
Manifying blib/man3/JSON::XS.3pm
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib64/perl5/auto/JSON/XS/XS.bs
Installing /usr/local/lib64/perl5/auto/JSON/XS/XS.so
Installing /usr/local/lib64/perl5/JSON/XS.pm
Installing /usr/local/lib64/perl5/JSON/XS/Boolean.pm
Installing /usr/local/share/man/man1/json_xs.1
Installing /usr/local/share/man/man3/JSON::XS.3pm
Installing /usr/local/share/man/man3/JSON::XS::Boolean.3pm
Installing /usr/local/bin/json_xs
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed JSON-XS-4.03 (upgraded from 3.01)
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/JSON-XS-4.03/install.json
Searching local::lib () on cpanmetadb ...
--> Working on local::lib
Fetching http://www.cpan.org/authors/id/H/HA/HAARG/local-lib-2.000029.tar.gz
-> OK
Unpacking local-lib-2.000029.tar.gz
Entering local-lib-2.000029
Checking configure dependencies from META.json
Configuring local-lib-2.000029
Running Makefile.PL
Warning: prerequisite ExtUtils::MakeMaker 7.00 not found. We have 6.68.
Checking if your kit is complete...
Looks good
Writing Makefile for local::lib
-> OK
-> FAIL No MYMETA file is found after configure. Your toolchain is too old?
Building local-lib-2.000029
cp lib/POD2/PT_BR/local/lib.pod blib/lib/POD2/PT_BR/local/lib.pod
cp lib/lib/core/only.pm blib/lib/lib/core/only.pm
cp lib/local/lib.pm blib/lib/local/lib.pm
cp lib/POD2/DE/local/lib.pod blib/lib/POD2/DE/local/lib.pod
Manifying blib/man3/POD2::PT_BR::local::lib.3pm
Manifying blib/man3/lib::core::only.3pm
Manifying blib/man3/local::lib.3pm
Manifying blib/man3/POD2::DE::local::lib.3pm
Installing /usr/local/share/perl5/POD2/PT_BR/local/lib.pod
Installing /usr/local/share/perl5/POD2/DE/local/lib.pod
Installing /usr/local/share/perl5/lib/core/only.pm
Installing /usr/local/share/perl5/local/lib.pm
Installing /usr/local/share/man/man3/POD2::DE::local::lib.3pm
Installing /usr/local/share/man/man3/POD2::PT_BR::local::lib.3pm
Installing /usr/local/share/man/man3/lib::core::only.3pm
Installing /usr/local/share/man/man3/local::lib.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed local-lib-2.000029 (upgraded from 1.008010)
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/local-lib-2.000029/install.json
Searching Try::Tiny () on cpanmetadb ...
--> Working on Try::Tiny
Fetching http://www.cpan.org/authors/id/E/ET/ETHER/Try-Tiny-0.31.tar.gz
-> OK
Unpacking Try-Tiny-0.31.tar.gz
Entering Try-Tiny-0.31
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68)
Configuring Try-Tiny-0.31
Running Makefile.PL
Checking if your kit is complete...
Looks good
Wide character in print at /usr/share/perl5/vendor_perl/ExtUtils/MakeMaker.pm line 1054.
Wide character in print at /usr/share/perl5/vendor_perl/ExtUtils/MakeMaker.pm line 1054.
Writing Makefile for Try::Tiny
-> OK
Checking dependencies from META.json ...
Checking if you have strict 0 ... Yes (1.07)
Checking if you have warnings 0 ... Yes (1.13)
Checking if you have constant 0 ... Yes (1.27)
Checking if you have Exporter 5.57 ... Yes (5.68)
Checking if you have Carp 0 ... Yes (1.26)
Building Try-Tiny-0.31
cp lib/Try/Tiny.pm blib/lib/Try/Tiny.pm
Manifying blib/man3/Try::Tiny.3pm
Installing /usr/local/share/perl5/Try/Tiny.pm
Installing /usr/local/share/man/man3/Try::Tiny.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed Try-Tiny-0.31 (upgraded from 0.12)
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/Try-Tiny-0.31/install.json
Already tried version. Skipping.
Searching YAML::Syck () on cpanmetadb ...
--> Working on YAML::Syck
Fetching http://www.cpan.org/authors/id/T/TO/TODDR/YAML-Syck-1.34.tar.gz
-> OK
Unpacking YAML-Syck-1.34.tar.gz
Entering YAML-Syck-1.34
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (6.68)
Configuring YAML-Syck-1.34
Running Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for YAML::Syck
-> OK
-> FAIL No MYMETA file is found after configure. Your toolchain is too old?
Building YAML-Syck-1.34
cp lib/JSON/Syck.pm blib/lib/JSON/Syck.pm
cp lib/YAML/Loader/Syck.pm blib/lib/YAML/Loader/Syck.pm
cp lib/YAML/Dumper/Syck.pm blib/lib/YAML/Dumper/Syck.pm
cp lib/YAML/Syck.pm blib/lib/YAML/Syck.pm
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" bytecode.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" emitter.c
emitter.c: In function ‘syck_emitter_escape’:
emitter.c:835:13: warning: pointer targets in passing argument 2 of ‘syck_emitter_write’ differ in signedness [-Wpointer-sign]
syck_emitter_write( e, src + i, 1 );
^
emitter.c:290:1: note: expected ‘const char *’ but argument is of type ‘unsigned char *’
syck_emitter_write( SyckEmitter *e, const char *str, long len )
^
emitter.c: In function ‘syck_emit_1quoted’:
emitter.c:847:10: warning: unused variable ‘do_indent’ [-Wunused-variable]
char do_indent = 0;
^
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" gram.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" handler.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" implicit.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" node.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" syck_.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" syck_st.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" token.c
token.re: In function ‘sycklex_yaml_utf8’:
token.re:544:36: warning: variable ‘lvl’ set but not used [-Wunused-but-set-variable]
/usr/bin/perl /usr/share/perl5/vendor_perl/ExtUtils/xsubpp -typemap /usr/share/perl5/ExtUtils/typemap Syck.xs > Syck.xsc && mv Syck.xsc Syck.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" Syck.c
In file included from Syck.xs:5:0:
perl_syck.h: In function ‘json_syck_mark_emitter’:
perl_syck.h:837:5: warning: enumeration value ‘SVt_NULL’ not handled in switch [-Wswitch]
switch (SvTYPE(sv)) {
^
perl_syck.h:837:5: warning: enumeration value ‘SVt_BIND’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_IV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_NV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVNV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVMG’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_REGEXP’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVGV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVLV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVCV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVFM’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIO’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_LAST’ not handled in switch [-Wswitch]
In file included from Syck.xs:8:0:
perl_syck.h: In function ‘yaml_syck_mark_emitter’:
perl_syck.h:837:5: warning: enumeration value ‘SVt_NULL’ not handled in switch [-Wswitch]
switch (SvTYPE(sv)) {
^
perl_syck.h:837:5: warning: enumeration value ‘SVt_BIND’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_IV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_NV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVNV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVMG’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_REGEXP’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVGV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVLV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVCV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVFM’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIO’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_LAST’ not handled in switch [-Wswitch]
perl_syck.h: In function ‘yaml_syck_emitter_handler’:
perl_syck.h:909:9: warning: enumeration value ‘SVt_NULL’ not handled in switch [-Wswitch]
switch (SvTYPE(SvRV(sv))) {
^
perl_syck.h:909:9: warning: enumeration value ‘SVt_BIND’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_IV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_NV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PVIV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PVNV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PVLV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PVFM’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PVIO’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_LAST’ not handled in switch [-Wswitch]
Running Mkbootstrap for YAML::Syck ()
chmod 644 Syck.bs
rm -f blib/arch/auto/YAML/Syck/Syck.so
gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wl,-z,relro bytecode.o emitter.o gram.o handler.o implicit.o node.o syck_.o syck_st.o token.o Syck.o -o blib/arch/auto/YAML/Syck/Syck.so \
\
chmod 755 blib/arch/auto/YAML/Syck/Syck.so
cp Syck.bs blib/arch/auto/YAML/Syck/Syck.bs
chmod 644 blib/arch/auto/YAML/Syck/Syck.bs
Manifying blib/man3/JSON::Syck.3pm
Manifying blib/man3/YAML::Syck.3pm
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib64/perl5/auto/YAML/Syck/Syck.bs
Installing /usr/local/lib64/perl5/auto/YAML/Syck/Syck.so
Installing /usr/local/lib64/perl5/YAML/Syck.pm
Installing /usr/local/lib64/perl5/YAML/Loader/Syck.pm
Installing /usr/local/lib64/perl5/YAML/Dumper/Syck.pm
Installing /usr/local/lib64/perl5/JSON/Syck.pm
Installing /usr/local/share/man/man3/YAML::Syck.3pm
Installing /usr/local/share/man/man3/JSON::Syck.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed YAML-Syck-1.34 (upgraded from 1.27)
Installing /usr/local/share/perl5/x86_64-linux-thread-multi/.meta/YAML-Syck-1.34/install.json
12 distributions installed